Fenix PD36 TAC Tactical Flashlight Operating Instructions

On/off of the PD36TAC

With the light unlocked and switched off, tap the tactical tail switch to momentarily turn on the light, release it the light will go out, fully press the tactical tail switch to constantly turn on the light (less than 0.8 seconds), fully press again to turn off the light.

Mode Switching

In any state, rotate the toggle switch to select the needed mode, rotate the toggle switch clockwise to the end to enter tactical mode, rotate the toggle switch counterclockwise to the end to enter Duty mode, to the middle to enter Lockout mode.

Output Selection of the PD36TAC

Tactical Mode 

Tap the tactical tail switch to momentarily turn on the light, fully press the tactical tail switch to lock the light on High output level. Press and hold the tactical tail switch for 0.8 seconds to enter Strobe, tap the tactical tail switch to turn back to High output level. Fully press the tactical tail switch to turn off the light.

Duty Mode

Tap the tactical tail switch to cycle through Eco→Low→Med→High→Turbo, fully press the tactical tail switch to lock the output level, tap again to cycle the output levels (with intelligent memory circuit). Press and hold the tactical tail switch for 0.8 seconds to enter Strobe, tap the tactical tail switch to return to the previously used output level. Fully press the tactical tail switch to turn off the light.

Instant Strobe

In Tactical or Duty mode, press and hold the tactical tail switch for 0.8 seconds to enter Strobe, tap the tactical tail switch again to exit Strobe.

Lock/Unlock

Lock With the light switched on, rotate the toggle switch to the middle position to lock the chosen output level, at this time, the tactical switch does not work and the output levels can not be selected. With the light switched off, rotate the toggle switch to the middle position to lock the tactical tail switch, at this time, the tactical tail switch does not work and the light can not be turned on. 

Unlock Rotate the toggle switch to Tactical mode OR Duty mode to unlock the light.

Battery Specifications of the PD36 TAC

Warning: *21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.

Battery Replacement

Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw the tail cap back on.

Intelligent Overheat Protection

The light will accumulate a lot of heat when used on higher output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of higher modes.

Low-voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output, the light blinks 3 times every 5 minutes to remind you to recharge or replace the battery. 

Note: This only works with Fenix ARB-L21 Series 21700 rechargeable Li-ion battery.

Usage and Maintenance of the PD36TAC

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
• Lock the light or remove the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: The battery needs replacing.
  Solution: Replace battery pack /battery (Ensure battery is inserted according to the manufacturer’s specifications).
  B: The contact or contact point of the battery or flashlight is dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.

Warning

• This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
• This flashlight will accumulate a lot of heat when used for extended periods, resulting in high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
• The LED of this flashlight is not replaceable; so the entire light should be replaced when the LED reaches the end of its life.
• All information provided in this manual is subject to change without prior notice.

FAQs about Fenix PD36 TAC Flashlight 

Q1. What is the product positioning of PD36 TAC? And who are the target customers? 

A: The Fenix PD36 TAC flashlight is a mechanical flashlight that remains in pocket size but focuses on tactical employment. Included with a 21700 rechargeable Li-ion battery, the PD36 TAC emits a max 3000-lumen output and has an impressive beam distance of up to 274 meters. The PD36 TAC features a dual-function tactical switch which enhances its tactical capabilities. The Tactical Mode strengthens the PD36TAC with a faster operation and simplified selection of high and instant strobe. Switch to the Duty Mode by rotating the toggle switch, the PD36 TAC delivers 6 output modes including a strobe. Made for professional use, security and law enforcement, the PD36 TAC is truly countable to deliver reliable, powerful lighting for a wide range of situations.  

Q2. What are the key features and benefits of PD36 TAC? 

A:  1. Tactical and Duty modes for flexibly needed choice and operation. 

    2. Patented dual-function tactical switch for instantly tactical activation. 

3. Single-handed toggle switch for mode selection. 

4. Lockout function avoids accidental activation. 

Q3. What kind of LED is used in PD36 TAC? And what are the beam angles? 

A: A Luminus SST70 LED with a lifespan of 50,000 hours. 

  Beam angles: spot beam angle 16°, spill beam angle 81°. 

Q4. Does PD36 TAC have overheated protection? 

A: Yes. The light will accumulate a lot of heat when used on higher output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of higher modes.  

Q5. What battery does the PD36 TAC support? 

A: It supports one rechargeable 21700 Li-ion battery. 

Q6. What are the optional accessories for PD36 TAC? 

A: ALG-00 rail mount, ALG-18 rail mount, AER-05 remote pressure switch, AOD-S V2.0 diffuser tip, ALP-10S flashlight holster, and more. 

Q7. What is the APF? 

A: The APF (Advanced Pulse-frequency Transmission System) was developed by Fenix Laboratory for producing better flashlights. It has abandoned the traditional development way, breaking through the technology bottleneck, allowing flashlight with a tail switch to achieve a higher level of performance: 

1. Higher output: the APF system has made higher lumens from a forward switch possible, it breaks the limitation of current.   

2. Simpler multi-functional tail switch: this APF technology can transmit various signal commands through a single layer within the light body. Traditional signal transmission requires a multi-layer system. Thanks to this new single-layer system, the light size can be greatly reduced and the structure will be more compact. 

3. Better anti-interference performance: the APF system combats signal interference, but it doesn't work if it is applied to a magnetic switch. Therefore, the PD36 TAC will be less prone to interference based on the use of a mechanical switch.  

Q8. What should I do if the PD36 TAC needs repair?

A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.

2. 2-year free repair: Fenix will repair a light free of charge within 2 years of purchase if problems develop with normal use.

3. Lifetime maintenance: If repair is required after 2 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.

4. If you need warranty service, fill out the warranty form at https://www.fenixlighting.com/pages/warranty-repairs to start your repair claim.